Model LV-PRO-300BSWEdition EN · 04 / 2026 · V1Doc. No. LV300-EN-01

Beam / Spot / Wash Hybrid Moving Head

LV-PRO-300BSW

300 W hybrid moving head with CMY+CTO color mixing, color wheel, fixed & rotating gobo wheel, iris, prism, frost and 3–46° zoom

Operating manual. Please read in full before first use and keep for future reference.

Function

Beam · Spot· Wash

Pan / Tilt

540° / 270°16-bit

DMX channels

25standard mode

IP rating

IP20Indoor

Foreword

00Welcome

Thank you for choosing the Lexvision LV-PRO-300BSW — a 300 W beam/spot/wash hybrid moving head with CMY+CTO color mixing, color wheel, fixed and rotating gobo wheel, iris, interchangeable prism, frost and motorized zoom.

This document covers installation, operation, maintenance and troubleshooting. Read the manual in full — especially the Safety Information chapter — before first use, and keep it with the unit.

0.1Intended Use

The LV-PRO-300BSW is built for indoor use (IP20) — large-scale live performance, theater, studio, clubs and discos.

0.2Scope of Delivery

1 × Lexvision LV-PRO-300BSW
2 × Omega clamps
1 × Signal cable · 1 × Power cable
1 × Operating manual

Table of Contents

—Overview

01Safety Information04
02Technical Data05
03Power & DMX Connection06
04Control Panel & Menu07
05DMX Channel Chart (25 CH, complete)08
5.1Color Wheel — Channel 0511
5.2Fixed Gobo Wheel — Channel 1012
5.3Rotating Gobo Wheel — Channel 1113
06Maintenance & Troubleshooting14
—CE Compliance Notice15

Chapter 01

01Safety Information

Read this chapter fully before first use.

Warning — Hazardous VoltageTouching live parts risks a dangerous electric shock. Electrical connection only by qualified personnel.

After temperature changes (e.g. after transport), let the unit reach room temperature before switching on — condensation can damage it.
Do not point the beam at subjects closer than 10 m; do not look directly into it.
Do not carry the unit alone; never use the head as a handle — risk of mechanical damage.
Do not install in overheated, damp or very dusty environments; do not lay power cables on the floor.
The mounting point must safely bear the weight of the fixture; the fixture must additionally be secured with a suitable safety cable of sufficient load rating in accordance with local regulations and laws.
Never stand directly below the fixture during mounting/removal/service; minimum distance to combustible material 0.5 m.
Replace lenses if damaged or severely scratched.
Operate only by qualified personnel familiar with the fixture.

Chapter 02

02Technical Data

Light Source & Optics

LED source	1 × 300 W white LED module
Color temperature	7000 K
LED lifespan	approx. 50,000 h
Zoom	3° – 46°, motorized linear
Color mixing	Linear CMY + CTO
Color wheel	1 + 7 colors, bi-directional rainbow effect
Fixed gobo wheel	14 gobos + open
Rotating gobo wheel	7 HD interchangeable gobos + open
Prism	1 interchangeable, rotating & indexable prism (3/8/16/24 facet optional)
Iris	Linear adjustable, with macro effect
Frost	1 filter, linear
Focus	Auto focus (5/7.5/10/15 m) + fine adjustment
Dimmer / Strobe	0–100 % linear · electronic, 0.3–20 flashes/s

Movement & Control

Pan	0 – 540°, 16-bit, auto-reset
Tilt	0 – 270°, 16-bit, auto-reset
Protocol	DMX-512, RDM, W-DMX (LumenRadio) optional, Art-Net optional
DMX channels	25 CH standard mode
Display	2.4" color LCD, touch buttons, EN/CN menu
Fan mode	Normal / Performance / Quiet

Electrical & Housing

Input voltage	AC 100 – 240 V, 50/60 Hz
Power draw	450 W @ 220 V
IP rating	IP20 — indoor
Connectors	Seetronic power IN/OUT, 3-/5-pin XLR DMX/RDM IN/OUT
Dimensions	568 × 337 × 240 mm
Weight	15 kg net

Chapter 03

03Power & DMX Connection

3.1Power Connection

Input voltage	AC 100 – 240 V, 50/60 Hz
Connector	Seetronic power IN/OUT

3.2DMX512 Connection

3-pin XLR connector (5-pin optional): pin 1 ground, pin 2 DATA−, pin 3 DATA+. Connect fixtures only in series — DMX OUT of the console/preceding fixture to DMX IN of the next.

For long cable runs or electrically noisy environments (e.g. discos), fit a 120 Ω DMX terminator between pins 2 and 3 at the last fixture.
Cable: two-core, screened, with XLR input/output connectors.
Optional: wireless DMX (W-DMX/LumenRadio) or Art-Net can be enabled via the menu.

Chapter 04

04Control Panel & Menu

Buttons: MODE/ESC (exit menu/back), UP/DOWN (navigate/change value), ENTER (select/confirm).

Main menu	Function	Options
Information	Address	1–512
	Runtime	Operating time
	Version	Firmware version
	Temperature	Main board / light source
	Fan Speed	Fan RPM
	Error Message	Error log
Setting	Reset	Reboot / Default Data
	Channel Set	Select channel mode
	Signal	DMX512 / Art-Net / Program
	Offline Set	Home / Hold
	Fan Mode	Normal / Performance / Quiet
	Wireless Set	On / Off
	Artnet Set	IP address / subnet mask / universe
	RDM UID	Device ID
Display	Language	English / Chinese
	Backlight	On / Off / Flash
	Reverse	On / Off / Auto
User	Setting Lock	Code entry
	Key Lock	On / Off
	Program	Select/edit program 1–8

Chapter 05

05DMX Channel Chart (1/3 · Channel 01–09)

CH	Function	Value	Description
01	Pan	0 – 255	—
02	Pan Fine	0 – 255	—
03	Tilt	0 – 255	—
04	Tilt Fine	0 – 255	—
05	Color wheel see chapter 5.1	0–7	No colour
		8–15	Colour 1 — Red
		16–23	Colour 2 — Yellow
		24–31	Colour 3 — Blue
		32–39	Colour 4 — Light green
		40–47	Colour 5 — Orange
		48–55	Colour 6 — Magenta
		56–63	Colour 7 — Dark blue
		64–71	Split colour 1
		72–79	Split colour 2
		80–87	Split colour 3
		88–95	Split colour 4
		96–103	No colour
		104–221	Colour arbitrary positioning
		222–238	Rotate left
		239–255	Rotate right
06	Cyan	0 – 255	—
07	Magenta	0 – 255	—
08	Yellow	0 – 255	—
09	Colour Temperature (CTO)	0 – 255	—

Continued on page 9

05DMX Channel Chart (2/3 · Channel 10–17)

Continued from page 8

CH	Function	Value	Description
10	Fixed gobo wheel see chapter 5.2	0–3	No gobo
		4–7	Gobo 1
		8–11	Gobo 2
		12–15	Gobo 3
		16–19	Gobo 4
		20–23	Gobo 5
		24–27	Gobo 6
		28–31	Gobo 7
		32–35	Gobo 8
		36–39	Gobo 9
		40–43	Gobo 10
		44–47	Gobo 11
		48–51	Gobo 12
		52–55	Gobo 13
		56–59	No gobo
		60–67	Gobo 1 shake, slow → fast
		68–75	Gobo 2 shake, slow → fast
		76–83	Gobo 3 shake, slow → fast
		84–91	Gobo 4 shake, slow → fast
		92–99	Gobo 5 shake, slow → fast
		100–107	Gobo 6 shake, slow → fast
		108–115	Gobo 7 shake, slow → fast
		116–123	Gobo 8 shake, slow → fast
		124–131	Gobo 9 shake, slow → fast
		132–139	Gobo 10 shake, slow → fast
		140–147	Gobo 11 shake, slow → fast
		148–155	Gobo 12 shake, slow → fast
		156–163	Gobo 13 shake, slow → fast
		164–167	No gobo
		168–211	Rotate left
		212–255	Rotate right
11	Rotating gobo wheel see chapter 5.3	0–7	No gobo
		8–15	Gobo 1
		16–23	Gobo 2
		24–31	Gobo 3
		32–39	Gobo 4
		40–47	Gobo 5
		48–55	Gobo 6
		56–63	Gobo 7
		64–71	No gobo
		72–79	Gobo 1 shake, slow → fast
		80–87	Gobo 2 shake, slow → fast
		88–95	Gobo 3 shake, slow → fast
		96–103	Gobo 4 shake, slow → fast
		104–111	Gobo 5 shake, slow → fast
		112–119	Gobo 6 shake, slow → fast
		120–127	Gobo 7 shake, slow → fast
		128–135	No gobo
		136–195	Rotate left
		196–255	Rotate right
12	Gobo rotation	0–3	No effect
		4–123	Gobo angle (R-gobo)
		124–187	Rotate left
		188–191	Stop
		192–255	Rotate right

Continued on page 10

05DMX Channel Chart (3/3 · Channel 13–25)

Continued from page 9

CH	Function	Value	Description
13	Dimmer	0 – 255	—
14	Strobe	0–3	Open
		4–67	Strobe 1
		68–99	Strobe 2
		100–131	Strobe 3
		132–175	Strobe 4
		176–247	Strobe 5
		248–251	Random strobe 1
		252–255	Random strobe 2
15	Dimmer mode	0–63	Refresh rate 1200, auto
		64–127	Refresh rate 1200, fast
		128–191	Refresh rate 13672, auto
		192–255	Refresh rate 13672, fast
16	Prism	0–31	No prism
16	Prism	32–255	Prism 1 on
17	Prism rotation	0–3	Stop
		4–123	Prism angle
		124–187	Rotate left, fast → slow
		188–191	Stop
		192–255	Rotate right, slow → fast
18	Zoom	0 – 255	—
19	Focus	0 – 255	—
20	Auto focus distance	0–3	Auto focus disabled
		4–63	5 m
		64–127	7.5 m
		128–191	10 m
		192–255	15 m
21	Auto focus distance fine	0 – 255	Continuous adjustment within above range
22	Iris	0–127	Open to close
		128–135	Close
		136–173	Iris movement 1
		174–211	Iris movement 2
		212–249	Iris movement 3
		250–255	Close
23	Frost	0–9	No effect
23	Frost	10–255	Linear frost
24	Scan speed	0 – 255	fast → slow
25	Control (reset/function)	0–19	No function
		20–29	Reset all
		30–39	Reset pan/tilt
		40–49	Reset colour/gobo/CMY/CTO
		50–59	Reset zoom/focus/prism/frost
		60–69	No effect
		70–74	Display default
		75–79	Display off (not persistent)
		80–84	Display on (not persistent)
		85–89	Fan speed low (persistent)
		90–99	Fan speed medium/high (persistent)
		100–255	No function

Channel 25: hold value for more than 8 seconds to take effect, then return to 0 to avoid repeated activation.

5.1Color Wheel — Channel 05 (open + 7 colors + 4 split colors, bi-directional rainbow)

Colour and gobo overview from the product catalogue

CH 05	Color
0–7	No colour (open)
8–15	Colour 1 — Red
16–23	Colour 2 — Yellow
24–31	Colour 3 — Blue
32–39	Colour 4 — Light green
40–47	Colour 5 — Orange
48–55	Colour 6 — Magenta
56–63	Colour 7 — Dark blue
64–71	Split colour 1
72–79	Split colour 2
80–87	Split colour 3
88–95	Split colour 4
96–103	No colour (open)
104–221	Colour arbitrary positioning
222–238	Rotate left
239–255	Rotate right

The catalog lists seven colours for the colour wheel (white + colour 1–7). Slot positions 8–11 of the DMX chart are not colour-specified by the manufacturer.

5.2Fixed Gobo Wheel — Channel 10 (13 gobos + open)

CH 10	Gobo
0–3	No gobo
4–7	Gobo 1
8–11	Gobo 2
12–15	Gobo 3
16–19	Gobo 4
20–23	Gobo 5
24–27	Gobo 6
28–31	Gobo 7
32–35	Gobo 8
36–39	Gobo 9
40–43	Gobo 10
44–47	Gobo 11
48–51	Gobo 12
52–55	Gobo 13

Per-gobo shake effects (60–163) and wheel run (168–255) see chapter 05, page 9.

5.3Rotating Gobo Wheel — Channel 11 (7 HD interchangeable gobos + open)

CH 11	Gobo
0–7	No gobo
8–15	Gobo 1
16–23	Gobo 2
24–31	Gobo 3
32–39	Gobo 4
40–47	Gobo 5
48–55	Gobo 6
56–63	Gobo 7

Per-gobo shake effects (72–127) and wheel run (136–255), gobo rotation (channel 12) see chapter 05, page 9.

Chapter 06

06Maintenance & Troubleshooting

Check screws regularly for tightness and corrosion.
Check housing, lenses and mounts for deformation.
Moving parts must show no wear or imbalance.
Check power cables for damage, material fatigue and deposits.
Clean inner and outer lenses weekly; clean fans weekly.
Have a detailed electrical check performed by a qualified electrician every three months.
Clean only with a moist, lint-free cloth — never use alcohol or solvents.

Disconnect from Mains before MaintenanceNo serviceable parts inside. Repairs only by the manufacturer or an authorized service partner.

The signed EU Declaration of Conformity for this product is available upon request from Lexvision GmbH, Waldweg 26, 54636 Sefferweich, Germany.

Appendix

—CE Compliance Notice

The manufacturer declares under its sole responsibility that the LV-PRO-300BSW complies with the relevant EU harmonization legislation.

EU Declaration of Conformity

A signed EU Declaration of Conformity exists for this product. It is not part of this manual and can be requested from us at any time — by email to verkauf@lexvision.de or by phone on +49 (0) 651 14567727, stating the product designation.